Neon Spector OS by OscillatorSynk

Oscillator 1 timbre

Both sawtooth and square oscillators are enabled.

Pulse width of square oscillator is set to 68% (50% is perfectly square, 100% is very short pulsewave) and is modulated by LFO 2.

LFO 2 direct modulation amount for pulse width of square oscillator is 91.

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 213.

Tone for oscillator 2 is manually set to 56.

Volume (VCA) volume

Amplification level is set to 6dB (255) and is modulated by VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is off.

Oscillators ranges timbre

Oscillators 1 range is 8'.

Oscillators 2 range is 16'.

Noise timbre

Noise level is manually set to 63.

High-pass filter (HPF) timbre

High-pass filter cut-off frequency is set to 229.01Hz (135) and is modulated by Note Num.

Note Num mod-matrix 2 modulation amount for high-pass filter cut-off frequency is 50.

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 298.19Hz (76) and is modulated by Note Vel, LFO 2, VCF Env.

LFO 2 direct modulation amount for low-pass filter cut-off frequency is 50.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 112.

Low-pass filter envelope amount is modulated by Note Vel, Note Num.

Note Vel direct modulation amount for low-pass filter envelope amount is 149.

Note Num direct modulation amount for low-pass filter envelope amount is 105.

Filter resonance is statically set to 52% (133).

Oscillator drift & unison detuning timbre

Unison detune level is set to ±18 cents (92) and is modulated by Mod Wheel.

Mod Wheel mod-matrix 3 modulation amount for unison detune level is 18.

Oscillators drift level is manually set to 24. Drift rate is 7

Performance triggering timbre

Envelope triggering mode is set to re-trigger.

Oscillator 1 pitch pitch

Oscillator 1 pitch is modulated by LFO 1.

LFO 1 direct modulation amount for oscillator 1 pitch is 10.

Portamento pitch

Portamento time is manually set to 166.

Tuning pitch

Patch Neon Spector OS is transposed by 12 semitones.

FX routing & levels fx

FX mode is set to Send, and routing is

Effect 1 level is off. Effect 2 level is off. Effect 3 level is manually set to 19. Effect 4 level is manually set to 12.

TC Deep Reverb fx

not yet complete

Flange & Reverb fx

not yet complete


Mod Wheel modulator

Controls OSC 1 Mod Wheel > Pitch Mod Depth, OSC 2 Mod Wheel > Pitch Mod Depth, Unison Detune.

functiontypedestinationamount
pitch menu OSC 1 Mod Wheel > Pitch Mod Depth 23
pitch menu OSC 2 Mod Wheel > Pitch Mod Depth 13
timbre matrix Unison Detune 18

Note Num modulator

Controls VCF Keyboard Tracking, HPF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Keyboard Tracking 105
timbre matrix HPF Cut-off Frequency 50

Note Vel modulator

Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.

functiontypedestinationamount
timbre fader-indirect VCF Cut-off Frequency 112
menu VCF Envelope Velocity Sensitivity 149
menu VCA Envelope Velocity Sensitivity 59

LFO 1 modulator

Controls OSC 1 Pitch.

functiontypedestinationamount
pitch fader OSC 1 Pitch 10
namevalue
LFO 1 Rate 3.84Hz (157)
LFO 1 Delay / Fade 2.84s (110)
LFO 1 Shape Triangle
LFO 1 Key Sync off
LFO 1 Arp Sync off
LFO 1 Mono Mode 0
LFO 1 Slew Rate 0

LFO 2 modulator

Controls OSC 1 Pulse Width Modulation Depth, VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader OSC 1 Pulse Width Modulation Depth 91
timbre fader VCF Cut-off Frequency 50
namevalue
LFO 2 Rate 0.76Hz (101)
LFO 2 Delay / Fade 0s (0)
LFO 2 Shape Triangle
LFO 2 Key Sync off
LFO 2 Arp Sync off
LFO 2 Mono Mode 0
LFO 2 Slew Rate 0

VCA Env modulator

Controls VCA Gain for All Voices.

functiontypedestinationamount
volume menu VCA Gain for All Voices 255
namevalue
VCA Envelope Attack Time 0.16s (27)
VCA Envelope Decay Time 0.48s (82)
VCA Envelope Sustain Level 55% (142)
VCA Envelope Release Time 1.35s (143)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 128
VCA Envelope Decay Curve 0
VCA Envelope Sustain Curve 107
VCA Envelope Attack Curve 0

VCF Env modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 112
namevalue
VCF Envelope Attack Time 0s (0)
VCF Envelope Decay Time 9.94s (193)
VCF Envelope Sustain Level 0% (0)
VCF Envelope Release Time 1.57s (158)
VCF Envelope Trigger Mode Key (0)
VCF Envelope Attack Curve 128
VCF Envelope Decay Curve 0
VCF Envelope Sustain Curve 128
VCF Envelope Attack Curve 0